3 Things about the Centre of Mass

[the_ad id=”476″]

The centre of mass or mass centre is themeanlocation of all themassin a system.In the case of arigid body, the position of the centre of mass is fixed in relation to the body. In the case of a loose distribution of masses infree space, such asshotfrom ashotgunor theplanetsof thesolar system, the position of the centre of mass is a point inspaceamong them that may not correspond to the position of any individual mass.

The termcentre of massis often used interchangeably withcentre of gravity, but they are physically different concepts. They happen to coincide in a uniform gravitational field, but where gravity is not uniform,centre of gravityrefers tothe mean location of the gravitational forceacting on a body.

The centre of mass of a body does not generally coincide with its geometric centre, and this property can be exploited. Engineers try to design asports car‘scentre of mass as low as possible to make the carhandlebetter. Whenhigh jumpersperform a “Finsbury Flop“, they bend their body in such a way that it is possible for the jumper to clear the bar while his or her centre of mass does not.

CENTRE OF MASS OF A REGULAR OBJECT

If an object has uniformdensitythen its centre of mass is the same as thecentroidof its shape.

Examples:

• The centre of mass of a ring is at the centre of the ring (in the air).
• The centre of mass of a solid triangle lies on all threemediansand therefore at thecentroid, which is also the average of the three vertices.
• The centre of mass of a rectangle is at the intersection of the two diagonals.
• In a spherically symmetric body, the centre of mass is at the centre. This approximately applies to theEarth: the density varies considerably, but it mainly depends on depth and less on thelatitudeandlongitudecoordinates.
• More generally, for any symmetry of a body, its centre of mass will be a fixed point of that symmetry.

CENTRE OF MASS OF AN ARBITRARY 2D PHYSICAL SHAPE

TheCentre of Mass of an arbitrary 2D physical shapecan be found using the following plumbline method as illustrated in the following table:

Step 1:An arbitrary 2D shape.	Step 2:Suspend the shape from a location near an edge. Drop aplumb lineand mark on the object.	Step 3:Suspend the shape from another location not too close to the first. Drop a plumb line again and mark. The intersection of the two lines is the centre of mass.

Centre of Mass of an arbitrary 2D physical shape

This method is useful when one wishes to find thecentroidof a complex planar shape with unknown dimensions. It relies on finding the centre of mass of a thin body of homogenousdensityhaving the same shape as the complex planar shape.

CENTRE OF MASS OF AN L-SHAPED OBJECT

This is a method of determining the centre of mass of an L-shaped object.

1. Divide the shape into two rectangles, as shown in fig 2. Find the centre of masses of these two rectangles by drawing the diagonals. Draw a line joining the centres of mass. The centre of mass of the shape must lie on this line AB.

2. Divide the shape into two other rectangles, as shown in fig 3. Find the centres of mass of these two rectangles by drawing the diagonals. Draw a line joining the centres of mass. The centre of mass of the L-shape must lie on this line CD.
3. As the centre of mass of the shape must lie along AB and also along CD, it is obvious that it is at the intersection of these two lines; at O. (The point O may or may not lie inside the L-shaped object.)